Search results

I got it!That's already been cleared up. Thank you for teaching me so kindly！

I had an External foot swich made. I had it made according to the specifications written in the instruction manual, but the LED stays on all the time. Do you have any idea what caused this?

After performing various operational checks, I discovered that although the EVH 5150Ⅲ 50w (channel switching is done via MIDI) is set to MIDI channel 1, it may be receiving a signal on MIDI channel 2, which is set to device 2 (Mini Effect Gizmo), preventing the amp's channel from switching...

Thank you for your quick reply! I will check when I get home. Is it possible that the version before the update is related to this symptom?

After updating my Master Mind firmware to the latest version (5.3.4), I'm now having trouble switching for MIDI compatible amp channels. (It selecting the wrong channel.) Before the upgrade, the amplifier channels could be switched without any problems. Do I need to set it up again my Master...

Could you please give me a specific example of how to use the following sentence that is written on the product page? Bidirectional MIDI Converter – splits a bidirectional MIDI connection into separate MIDI input and output jacks, or combines a MIDI input and output connection into a...

Sorry, I have an additional question. If I set the IA setting in the Buttons settings to Pre+/Pre- of the Eventide H9, do I need to configure the IA settings in any way?

I changed the Max Button Page setting to 3 in the editor, but I can't return to the first preset mode screen from the last page. Is there any setting I need to make?

Thank you for your kind reply to my question!! Do only the MIDI OUT and MIDI IN terminals support bidirectional MIDI?

I have a question about the MultiBox specification. [1]Are the RJM Mastermind series the only MIDI controllers that can be powered from the MultiBox's MIDI IN/Phantom Power OUT jacks? [2] The manual states that the MIDI OUT terminal is "Bidirectional compatible" but does this mean that it is...

I always appreciate your kind response! The text was displayed correctly, but the entire screen was dark, so I thought the LED might be defect.

yes I tried it I think my PBC10 contrast is 25. My guess is that the internal LED is broken, but what do you think?

I feel like the LED on my PBC10 isn't lighting up, is it a malfunction?

Is the Mini Effect Gizmo X signal processed entirely in analog?

Is there an expression pedal that is compatible with MasterMind LT?

When using a MIDI cable with the Mastermind Remote connector, should I use a DIN5-pin or DIN7-pin?

Is it possible to control Mastermind LT by sending program changes from an external MIDI device? What will happen to the Mastermind LT settings in that case?

Thank you for your kind response！！！

I have a question for swiching two my pre amps. Is it possible to connect two preamps and switch between them?

Thanks for always providing us with great products. I have a Question. I would like to know the impedance of the Mini Effect Gizmo X input