Latest activity
-
DDiezel replied to the thread The Letter A.One of my rigs is just as you have and do not experience this issue (FW 5.3.0). Post your .rjs config file, maybe it will help.
-
SeanTorresMusic posted the thread Recall Previous Preset on Source Collider? in PBC General Discussion.I have a solo page dedicated to all my solo patches on my PBC 6 with dedicated Delays and Reverbs on those patches. What I want to do is...
-
cuterigs replied to the thread Mastermind PBC Firmware / Editor 5.3.0 Release.I could be wrong but I believe this has to do with the new “ignore incoming CC” and PCs features added… if you check those boxes in your... -
Ccfcr replied to the thread Mastermind PBC Firmware / Editor 5.3.0 Release.After I updated the PBC/10 firmware to 5.3.0, the PBC/10 malfunctions in a few interesting ways. It seems to be sending a *lot* of MIDI...
-
-
DDimitri Papadimitriou replied to the thread PBC 6/X and Fractal FM3.ttt
-
rjmmusic replied to the thread Megx Output Question.Sorry, no, it'll only send the left side signal to the tip of the jack when set to mono. -
mcvittym replied to the thread Megx Output Question.Maybe I could also ask - if I (1) set the output to mono and (2) run loops 5 and 6 in stereo and (3) use a TRS connector at the output... -
rjmmusic replied to the thread Loop sound.Any mismatch between settings and the actual cable used will likely cause a problem.
-
rjmmusic replied to the thread The Letter A.Ok, I'll try myself when I'm back in the office. It's probably been a few versions since I did anything with the Axe-Fx.
-
mcandy879 replied to the thread Loop sound.What if I use TRS cable, but loop wasn’t set on stereo? I just changed the settings but didn’t checked it, could it be the thing? -
rjmmusic replied to the thread Mini Effect Gizmo Wet/Dry/Wet.Yes, just plug into the loop send and don't plug anything into the return. It will effectively split the signal at that point, sending...
-
rjmmusic replied to the thread Loop sound.Since your loops are configured as stereo, make sure that all of those loop sends and returns have stereo cables - they have to have a...
-
tony0360 replied to the thread The Letter A.Yes, I’m using the fractional bot. I have all the current updates installed on both the GT and the axe. -
rjmmusic replied to the thread The Letter A.Make sure that the GT has 5.3.0 installed and double check the firmware on the Axe-Fx as well. If the problem continues, please let me...
-
I've got an issue with my PBC since recently, I use loop 4 for Polymoon, loop 5 for Tonex and loop 6 for Strymons, now my issue is when...
